At RAM we have over 30 years of experience creating wire and cable connector assemblies. RAM has and knows how to use the tooling necessary to complete your assemblies at the highest possible quality level attainable.
JST Connectors and terminals
XH
The XH header is tall and fully shrouded so as to prevent the resin used to coat the PC board coming into contact with the mating pins. Designed for use specifically with resin coated ("potted") PC boards.
The header is a designed to accept XH mating receptacles.
The header is a designed to accept XH mating receptacles.
XH Terminals |
XH Connector Housings |
SXH-001T-P0.6 Jumpers |
SXA-001T-P0.6 |
XAP-xxV-1 (02V-15V) , XARP-xxV (02V-15V) |
ASXHSXH22K305, ASXHSXH22K152, ASXHSXH22K203, ASXHSXH22K51, ASXHSXH22K254, ASXHSXH22K102 |
XA
XA connector (W to B)
Secure locking device prevents accidental disconnection.
Header wafer is made of solder crack preventive material, glass-filled PA66 nylon.
Header pins are round and reflow-treated, which provides low insertion force.
Shrouded headers on radial-tape are also available.
Headers with polarizing bosses are also available.
Secure locking device prevents accidental disconnection.
Header wafer is made of solder crack preventive material, glass-filled PA66 nylon.
Header pins are round and reflow-treated, which provides low insertion force.
Shrouded headers on radial-tape are also available.
Headers with polarizing bosses are also available.
XA Terminals |
XA Connector Housings |
SXA-01T-P0.6 and SXAM-01T-P0.6 Jumpers |
SXAM-001T-P0.6, SXA-001T-P0.6, SXAM-01T-P0.6, SXA-01T-P0.6 |
XARR-xxVF (02VF-12VF) , XARR-xxV (02V-15V) |
ASXASXA22K152, ASXASXA22K305, ASXAMSXA22K305, ASXASXA22K51, ASXAMSXAM22K51, ASXAMSXAM22K152, ASXASXA22K102, ASXASXA22K203, ASXAMSXAM22K254, ASXAMSXA22K51, ASXAMSXA22K152, ASXAMSXA22K254, ASXAMSXA22K102, ASXASXA22K254, ASXAMSXAM22K305, ASXAMSXA22K203, ASXAMSXAM22K102, ASXAMSXAM22K203 |
XAD
XAD connector (W to B)
Double-row construction
Header wafer is made of solder crack preventive material, glass-filled PA66 nylon.
Secure locking device prevents accidental disconnection.
XAD connector (W to W)
Double-row type connector with secure locking device either for wire-to-wire connection or board-to-wire connection
Newly designed long body box-shaped contact reduces its shaking after mounted in the housing.
Contact lances with stabilizer-function prevents the lance deformation, and secures the stable contact retention force.
Double-row construction
Header wafer is made of solder crack preventive material, glass-filled PA66 nylon.
Secure locking device prevents accidental disconnection.
XAD connector (W to W)
Double-row type connector with secure locking device either for wire-to-wire connection or board-to-wire connection
Newly designed long body box-shaped contact reduces its shaking after mounted in the housing.
Contact lances with stabilizer-function prevents the lance deformation, and secures the stable contact retention force.
XAD Terminals |
XAD Connector Housings |
SXA-01T-P0.6, SXA-001T-P0.6, SXA-01T-P0.6L |
XADRP-xxV (08V-40V) |
XAG
The XAG is a 2.5mm pitch, crimp style, wire-to-board connector
With secure locking device
Low-profile
With secure locking device
Low-profile
XAG Terminals |
XAG Connector Housings |
SXA-01T-P0.6 |
XAGRP-051-K |
XM
XM connector (High box type)
High-box type XM connector with 8.9mm depth and 2.0mm height after assembly.
XM connector (W to W)
The inner-housing lock secures the plug to the receptacle and prevents accidental disconnection.
Secondary retainers provide added protection against non-insertion or disconnection.
Housing lances
Mountable on panels of various thickness without using tools.
High-box type XM connector with 8.9mm depth and 2.0mm height after assembly.
XM connector (W to W)
The inner-housing lock secures the plug to the receptacle and prevents accidental disconnection.
Secondary retainers provide added protection against non-insertion or disconnection.
Housing lances
Mountable on panels of various thickness without using tools.
XM Terminals |
XM Connector Housings |
SXA-01T-P0.6, SXA-001T-P0.6 |
XMP-xxV (02V-10V) , XMS=xxV (02V-10V) |
EH
The EH series is designed to meet the demand for the high-density connection of internal wires to PC boards.
Wire to Board Crimp style Connectors
Thin , Disconnectable, Crimp style type
Wire to Board Crimp style Connectors
Thin , Disconnectable, Crimp style type
EH Terminals |
EH Connector Housings |
SEH-001T-P0.6 Jumpers |
SEH-001T-P0.6, SEH-001T-P0.6L, SEH-002T-P0.6L, SEH-003T-P0.6L |
EHR-xx (2-15) |
ASEHSEH22K51, ASEHSEH22K254, ASEHSEH22K102, ASEHSEH22K152, ASEHSEH22K305, ASEHSEH22K203 |
SFH
SFH series connectors from JST features low profile with height of 3.0mm, compact size ideal for low current, low voltage applications
Connectors |
Contacts |
SFHR-02V-R SFHR-02V-L |
SSFH-001T-P0.5 SSFH-002T-P0.5 |
SH
The SH series is a compact, low profile design
Although this shrouded header has locking features for its mating receptacle, there are no holes in the header shroud that would adversely effect vacuum gripping equipment.
The receptacle has protrusions on both ends for an operator to disengage the receptacle from the header without holding the wires.
Although this shrouded header has locking features for its mating receptacle, there are no holes in the header shroud that would adversely effect vacuum gripping equipment.
The receptacle has protrusions on both ends for an operator to disengage the receptacle from the header without holding the wires.
SH Terminals |
SH Connector Housings |
SSH-003T-P0.2-H Jumpers |
SSH-003T-P0.2-H |
SHR-xxV-S-B (02V-20V), SHR-xxV-S (02V-15V) |
ASSHSSH28K51, ASSHSSH28K102, ASSHSSH28K152, ASSHSSH28K305, ASSHSSH28K203, ASSHSSH28K254 |
SUH
SUR connector that has been designed for 0.8mm pitch wire-to-board insulation displacement connector. This connector adopted the first crimping method in a minimum 0.8mm pitch of the wire-to-board type connector. Housing lance method provides the good workability and a constriction contact method provides the excellent contact reliability.
SUH Contact |
SUH Connectors |
SSUH-003T-P0.15 Jumpers |
SSUH-003T-P0.15 |
SUHR-02V-S, SUHR-02V-S-B, SUHR-03V-S, SUHR-03V-S-B, SUHR-04V-S, SUHR-04V-S-B, SUHR-05V-S, SUHR-05V-S-B, SUHR-06V-S, SUHR-06V-S-B, SUHR-10V-S, SUHR-10V-S-B, SUHR-12V-S, SUHR-12V-S-B, SUHR-14V-S, SUHR-14V-S-B, SUHR-16V-S, SUHR-16V-S-B, SUHR-20V-S, SUHR-20V-S-B |
ASSUHSSUH28W102 ASSUHSSUH28W152 ASSUHSSUH28W203 ASSUHSSUH28W305 ASSUHSSUH28W51 ASSUHSSUH28W254 |
BHM
BHM connector (4.0mm pitch, W to W)
Connector for liquid crystal display back light lamps
Contact lances
Box shaped construction of the housing prevents distortion during mating/unmating of the housings.
Withstanding voltage is also considered.
BHM connector (8.0mm pitch, W to W)
Connector for liquid crystal display back light lamps
Contact lances
Box shaped construction of the housing prevents distortion during mating/unmating of the housings.
Withstanding voltage is also considered.
Connector Terminals: SBHM-001T-P0.5, SBH-001T-P0.5
Connector Housings: BHMR-02V, BHMR-03V, BHMR-04V, BHMR-05V-RBHM
Connector for liquid crystal display back light lamps
Contact lances
Box shaped construction of the housing prevents distortion during mating/unmating of the housings.
Withstanding voltage is also considered.
BHM connector (8.0mm pitch, W to W)
Connector for liquid crystal display back light lamps
Contact lances
Box shaped construction of the housing prevents distortion during mating/unmating of the housings.
Withstanding voltage is also considered.
Connector Terminals: SBHM-001T-P0.5, SBH-001T-P0.5
Connector Housings: BHMR-02V, BHMR-03V, BHMR-04V, BHMR-05V-RBHM
BHM Terminals |
BHM Connector Housings |
SBH-001T-P0.5 Jumpers |
SBHM-001T-P0.5, SBH-001T-P0.5 |
BHMR-02V, BHMR-03V, BHMR-04V, BHMR-05V-RBHM |
ASBHMSBH22K51, ASBHMSBHM22K51, ASBHMSBH22K152, ASBHMSBHM22K152, ASBHMSBH22K305, ASBHMSBHM22K305, ASBHMSBH22K102, ASBHMSBHM22K102, ASBHMSBH22K203, ASBHMSBH22K254, ASBHMSBHM22K203, ASBHMSBHM22K254 |
VH
The VH connector is a small, field-proven connector for PC boards. It is reliable and has a large current carrying capacity. It can be used with a wide variety of signal, power supply, and output circuits that appear in consumer electronic products.
VH connector (High box type)
The header is tall and fully shrouded so as to prevent the resin used to coat the PC board coming into contact with the mating pins. Designed for use specifically with resin coated ("potted") PC boards.
The header is designed to accept VH mating receptacles.
The housing has a lock mechanism which prevents the connector from coming loose due to vibration. The mechanism also prevents missinsertion.
VH connector (High box type)
The header is tall and fully shrouded so as to prevent the resin used to coat the PC board coming into contact with the mating pins. Designed for use specifically with resin coated ("potted") PC boards.
The header is designed to accept VH mating receptacles.
The housing has a lock mechanism which prevents the connector from coming loose due to vibration. The mechanism also prevents missinsertion.
VH Terminals |
VH Connector Housings |
SVH-41T-P1.1 Jumpers |
SVH-21T-P1.1, SVH-41T-P1.1 |
VHR-xN (2-11) VHR-xM (2-9) , VHS-xV (2V-9V) |
ASVHSVH16K305, ASVHSVH16K51, ASVHSVH16K102, ASVHSVH16K203, ASVHSVH16K152, ASVHSVH16K254 |
NV
The NV series is suitable for a wide range of applications, from low-voltage, low-current signal circuits to power supply circuits requiring large currents.
- Wire to Board Crimp style Connectors
- Crimp style, Disconnectable, With secure locking device
NV Terminals |
NV Connector Housings |
SVH-21T-P1.1, SVH-41T-P1.1 |
NVR-xx (2 - 4) |
VB
The VB series is a large current carrying capacity connector that can be used with primary power supply circuits of consumer electronic products and various other circuits requiring large currents.
Box-shaped contact, Disconnectable, Wire to Board Crimp style Connectors.
Box-shaped contact, Disconnectable, Wire to Board Crimp style Connectors.
VB Terminals |
VB Connector Housings |
SVH-21T-P1.1 |
VBR-xx (2 - 12) |
RCY
The RCY connector is a compact, 2.5mm pitch wire-to-wire connector for use with a variety of circuits, from signal circuits to power supply circuits, in electrical equipment which is becoming more and more compact. The employment of a free spring contact method ensures stable contact performance, and superb working efficiency of insertion and removal.
RCY Terminals |
RCY Connector Housings |
SYM-001T-P0.6, SYF-001T-P0.6 |
SYR-02T, SYR-02TV, SYP-02T-1, SYP-02TV-1 |
SM
SM Features:
High contact pressure
Secure lock mechanism
Mountable on panels of various thickness without using tools.
The contacts are individually surrounded by housing walls.
High contact pressure
Secure lock mechanism
Mountable on panels of various thickness without using tools.
The contacts are individually surrounded by housing walls.
SM Terminals |
SM Connector Housings |
SYM-001T-P0.6, SHF-001T-08.BS |
SMP-0xxV-B(N)C |
PH
The dimple at the center of the PH connector contact ensures positive contact and low contact resistance at all times.
The contact has a long wire strip holding length of 2.6 +/-0.4mm.
Fully shrouded header
The same shrouded header can be used for the KR/KRD/CR insulation displacement connectors.
PH connector (High box type)
PH connector high box type, with 17.0mm mounting height and with 4.5mm thickness.
The contact has a long wire strip holding length of 2.6 +/-0.4mm.
Fully shrouded header
The same shrouded header can be used for the KR/KRD/CR insulation displacement connectors.
PH connector (High box type)
PH connector high box type, with 17.0mm mounting height and with 4.5mm thickness.
PH Terminals |
PH Connector Housings |
SKT-SKT Leads |
SPH-002T-P0.5S, SPH-002T-P0.5L, SPH-004T-P0.5S |
PHR-xx (2 - 16) |
ASPHSPH24K152, ASPHSPH24K305, ASPHSPH24K51, ASPHSPH24K203, ASPHSPH24K254 |
PA
PA connector Features
2.0mm pitch connector with secure locking device
Secure locking device
The housing has a locking device to prevent accidental disconnection because of routing wires or of vibration, and also reverse and different circuit numbers mating.
PA connector (High box type)
Secondary retainer mountable PA connector high-box type, with 20.7mm mounting height and 7.2mm thickness. The header has a secure lock cover device to protect the locking section.
2.0mm pitch connector with secure locking device
Secure locking device
The housing has a locking device to prevent accidental disconnection because of routing wires or of vibration, and also reverse and different circuit numbers mating.
PA connector (High box type)
Secondary retainer mountable PA connector high-box type, with 20.7mm mounting height and 7.2mm thickness. The header has a secure lock cover device to protect the locking section.
PA Terminals |
PA Connector Housings |
SPHD-001T-P0.5 Jumpers |
SPHD-001T-P0.5, SPHD-001T-P0.5, SPHD-001T-P0.5, SPHD-001T-P0.5 |
PAF-6S, PARP-()V, PAP-()V-S, PALR-))V(F) |
APALPA22K102, APALPA22K305, APALPA22K152, APALPA22K203, APALPA22K51 |
PBV
The PBV connector, which is mainly used for connecting PCB of flat television, is a crimping type connector and is designed to have a secure locking structure and a sucking area.
Connector Terminals: SPHD-001T-P0.5, SPHD-002T-P0.5
Connector Housings: PBVP-03V-S-1, PBVP-04V-S, PBVP-04V-S-1, PBVP-06V-S, PBVP-08V-S, PBVP-12V-S, PBVP-15V-S
Connector Terminals: SPHD-001T-P0.5, SPHD-002T-P0.5
Connector Housings: PBVP-03V-S-1, PBVP-04V-S, PBVP-04V-S-1, PBVP-06V-S, PBVP-08V-S, PBVP-12V-S, PBVP-15V-S
PBV Terminals |
PBV Connector Housings |
SPHD-001T-P0.5 Jumpers |
SPHD-001T-P0.5, SPHD-002T-P0.5 |
PBVP-03V-S-1, PBVP-04V-S, PBVP-04V-S-1, PBVP-06V-S, PBVP-08V-S, PBVP-12V-S, PBVP-15V-S |
APAPA22K152, APAPA22K305, APAPA22K51, APAPA22K102, APAPA22K203, APAPA22K254 |
PHD
PHD Features
- Double-row construction
- The box contact supplies stable contact performance.
- Fully shrouded header
PHD Connector Terminals |
PHD Connector Housings |
SPHD-001T-P0.5, SPHD-001T-P0.5, SPHD-002T-P0.5, SPHD-002T-P0.5 |
PHDR-10VS, PHDR-08VS, PHDR-12VS, PHDR-14VS, PHDR-16VS, PHDR-20VS, PHDR-18VS, PHDR-22VS, PHDR-24VS, PHDR-26VS, PHDR-30VS, PHDR-28VS, PHDR-34VS, PHDR-32VS |
Commonly stocked JST terminals
SBHSM-002T-PO.5 , SHF-001T-08SS , SLM-41T-P1.3E , SPAL-001T-P0.5 , SPH-002GW-P0.5S , SPH-002GW-P0.5S , SSH-003T-PO.2-H , SSW-105-02-S-S-RA , SVH-41T-P1.1 , SWPR-001T-P025 , SWT25X-URTC-S01-UU-UU , SXA-01T-PO.6 , SXH-001GU-P0.6 , SXH-001GU-P0.6 , SXH-001T-P0.6 , SXH-002T-P0.6 , SYM-001T-P0.6